Epson FX-2170 - Impact Printer User Manual Download Page 39

Page: 39 / 157

Printer utilities

The following DOS utilities are included with the printer:

Epson Remote! utility allows you to change the printer’s

default settings from your computer.

Epson Calibration utility lets you adjust the printing

alignment from your computer. Use this utility when the

lines in your printout do not appear to be aligned properly.

Installing Epson Remote!

Follow these steps to install Epson Remote! on your hard disk

drive:

Insert the diskette containing the EPSON Remote! utility into

your computer’s diskette drive.

In DOS, access the drive where you have loaded the diskette.

Change the directory to

UTILITY (that

is,

type A:\UTILITY

if the

diskette is in drive A).

Type

INSTALL

(space)

[drive name]

(space)

[directory name]

For example, type

INSTALL C: EPREMOTE,

and press

Enter.

Note:

Do not type a backslash (\) between the parameters. Use the space bar.

The installation is completed automatically.

1-18

Setting Up the Printer

Summary of Contents for FX-2170 - Impact Printer






























































































































































Search results

Summary of Contents for FX-2170 - Impact Printer

Reviews:

Related manuals for FX-2170 - Impact Printer

Brands by name

Popular brands

Epson FX-2170 - Impact Printer, User Manual

Search results

Summary of Contents for FX-2170 - Impact Printer

Reviews:

Related manuals for FX-2170 - Impact Printer

Brands by name

Popular brands