Printer Features
FONT COND. READY
L E D
LED
LED
OFF
OFF ON
OFF
O F F B L I N K S
OFF ON
OFF
Character Table
Character table PC437 (table 1) (standard)
PC437 (table 2)
PC865 (table
OFF ON ON
PC865 (table 2)
Notes:
1.
For table
codes
are control codes. (ESC 7 is set.)
For table 2, codes
are printable characters. (ESC 6 is set.)
2. The character tables for ESC/P mode and IBM mode
independently
in non-volatile memory.
Power On Default Settings
The printer also lets you change some of its power on parameters. To change the
settings shown
in Table 1-19, Group 3 Features (Power On Settings),
follow the steps
below.
1.
Turn on the printer while pressing the PAUSE and PAPER FEED buttons.
2.
a few seconds, press the buttons indicatedin Table 1-19 to change parameters.
Button
PAUSE
PAPER FEED
FONT
Feature
Input buffer
Draft printing speed
Auto CR
Betting
valid or invalid
high or normal
valid or invalid
T
standard (factory) setting
Notes:
1. Auto CR moves the next print position to the left margin when a LF or the
ESC J code is sent.
is two beeps. If no operation is executed within a
few seconds, the printer exits the power on selection mode with five beeps
l l l l
The selected value is stored in non-volatile memory.
3. The printer automatically becomes ready to print after the selection.
Self-Test
Press PAPER FEED while turning on the printer to put it in self-test mode. To stop
the self-test, turn off the printer. (The control panel is still operational in self-test
mode for paper handling and font selection.) When pages are printed
from
the cut-
1-22
Epson FX-870/1170
