Epson ExpressStation, User Manual

Page: 70 / 118

Power-on Diagnostic and Boot Errors
When the power-on diagnostic tests detect an error, the
computer displays a message on the screen (as described
below) and the speaker beeps twice. If the error occurs before
the computer initializes the video display, the speaker sounds a
series of beeps (described in the next section).
Each error is identified by a message number and a countdown
number which the computer uses as it executes the test
associated with the error. For example, the following message
is countdown number 100 and error message number 0018:
100 (0018):
Invalid configuration
information - please run SETUP
The table below lists the power-on diagnostic and boot error
messages, and some basic solutions to the problems. Check the
appropriate section(s) in this appendix for other solutions.
Power-on diagnostic and boot error messages
240 0007
200 0001
Gate A20 failure
190 2 f a i l u r e
180 Keyboard stuck key
Keyboard controller
Keyboard clock line
Keyboard data line
Keyboard failure
Contact your dealer
Contact your dealer
Contact your dealer
Check the keyboard
connection; if it is
connected, the
keyboard or controller
may have failed;
contact your dealer
170
160
0041 Pointer device failure
640 KB base memory
0 KB extended memory
Troubleshooting
A-3