Epson Expression 1600, User Manual

Page: 86 / 154

86
You see the EPSON Screen Calibration
Utility.
5. Move the slider right or left until the stripes
match as closely as possible. Then click
OK
.
The EPSON Screen Calibration Utility calibrates the preview
image you see in your EPSON TWAIN Pro driver to match
your monitor settings.
You won’t need to change the screen calibration as long as
you continue to use the same display. If you need to
recalibrate your screen at a later time, double-click the EPSON
Network Scanner folder on your hard drive, then double-click
the EPSON Screen Calibration icon.
6. When you see the screen on the right, enter
the IP address or host name of the scanner
server in the
Network Scanner Address
box.
(You can only use a host name if you have a
DNS server on your network.)
saffron.book Page 86 Tuesday, January 11, 2000 2:32 PM