Epson Expression 1600, User Manual

Page: 59 / 154

59
Film
or
TPU for Pos. Film
as your
Document Source
. If you’re using the
optional automatic document feeder, select
Auto Document Feeder
as your
Document Source
.
5. Click the
Preview
button.
You see a preview of your scan
in the window that opens.
6. Click the
Auto Locate
button to automatically
define the scan area around
the edges of your image. Or
adjust the scan area by
positioning the mouse pointer
over any of the eight boxes
around the marquee’s edge
and dragging the box to resize
the marquee.
Click the
Auto
Exposure
button to
automatically set the
highlight, midtones, and shadow exposure.
Generally it’s a good idea to use the Auto Exposure button to
obtain the best settings for your scan. If you’re not satisfied
with the results, see your electronic
EPSON Expression 1600
Software Reference Guide for information about adjusting
settings.
If you need to remove color cast from your image, use the
Gray Balance Intensity feature.
7. When you’ve finished making adjustments, click the
Scan
button.
The
READY
light on the front of the scanner flashes while it’s scanning. In a few
moments, a scanned image is imported into your host application’s window.
(If the
READY
light continues to blink, it may indicate an error condition. See
Chapter 7, “Solving Problems,” for more information.)
Click to
define the
scan area
automatically.
A dotted
marquee
frames the
area to be
scanned.
saffron.book Page 59 Tuesday, January 11, 2000 2:32 PM