Epson EX51, User Manual

Page: 71 / 122

Fine-Tuning the Projector
71
Enabling Password Protection
The default setting for the password is
0000
. Follow these steps to
create a new password:
1. Press the
Freeze
button on the remote control for five to seven
seconds. You see this screen:
2. Select the type(s) of password protection you want to use:
■
Power On Protect
: Prevents unauthorized use of the
projector. After the projector is plugged in and turned on,
you must enter a password to use the projector. Select
On
,
press
Enter
, then press
Esc
to return to the Password Protect
screen.
■
User’s Logo Protect
: Prevents your custom screen (see
page 73), display, and User’s Logo settings in the Extended
menu from being changed. Select
On
, press
Enter
, then press
Esc
to return to the Password Protect screen.
3. Use the arrow buttons to select
Password
and press
Enter
.
4. When you see a message asking if you want to change the
password, select
Yes
and press
Enter
.
5. Hold down the
Num
button and use the numeric keypad to enter
a four digit password.
6. When you see a confirmation message, reenter the password.
7. Press the
Menu
button, then press
Enter
to exit the screen.
8. Turn off and unplug the projector.
caution
If you lose the remote
control, you will not be able
to enter the password. Keep
the remote control in a safe
place at all times. Also, it’s a
good idea to write down
your password.
Hold down