Epson EX51, User Manual

Page: 38 / 122

38
Setting Up the Projector
4. If you are not connected to another image source, the Slideshow
program appears.
If you are connected to another image source, press the
USB
button on the remote control to go to the Slideshow program.
5. See page 57 for instructions on controlling the slideshow.
6. When you’re finished, press
Esc
and select
Exit
to exit the
Slideshow before turning off or removing the USB device.
Be sure to turn off your USB device (if necessary) before you remove
the device or cable from the projector. Failure to do so may damage
the device and/or the projector.
Turning the Projector On and Off
Turn on any connected computer or video equipment before starting
the projector so it can automatically detect and display the image
source. If you turn on the projector first, or have multiple pieces of
connected equipment, you may have to select the image source
manually (see page 44).
Follow these steps to turn on the projector:
1. Open the
A/V Mute
slide (lens cover).