3.
Tighten the screws on the VGA connector.
If your image colors appear incorrect, you may need to change the
Input Signal
setting in the projector's
Signal menu.
Note:
If you connected a game console, it may take a few seconds for your image to appear. To reduce
the lag time, set your game console's output signal to a progressive signal of 480p or 720p. See your
game console documentation for instructions.
Parent topic:
Related references
Input Signal Settings - Signal Menu
Related tasks
Connecting to a Video Source for Sound
Connecting to an S-Video Video Source
If your video source has an S-Video port, you can connect it to the projector using an optional S-Video
cable.
1.
Connect the S-Video cable to your video source's S-Video output port.
2.
Connect the other end to the projector's
S-Video
port.
Note:
If you connected a game console, it may take a few seconds for your image to appear. To reduce
the lag time, set your game console's output signal to a progressive signal of 480p or 720p. See your
game console documentation for instructions.
Parent topic:
34
