Epson EX3200, User Manual

Page: 69 / 126

Fine-Tuning the Projector
69
Restoring the Default Settings
You can use the
Reset
option on any menu to restore the
factory-default settings for the settings in that menu.
To restore all the projector settings to their factory-default values,
select the
Reset
menu, highlight
Reset All
, press
Enter
, and select
Yes
to confirm.
Adjusting the Image
You can use the Image menu to adjust the brightness, sharpness, color,
tint, contrast, and
Auto Iris
settings.
1. Press the
Menu
button on the projector or remote control and
select the
Image
menu. You see a screen similar to one of these:
note
When you select
Reset All
in the Reset menu, it does
not reset the Input Signal,
User’s Logo, Language, or
Lamp Hours settings.
note
If you are using the HDMI
port (EX5200/EX7200
only), you see the menu on
the left if the signal is digital
RGB video, or the menu on
the right if the signal is
component video.
Component video/ Composite video/
S-Video
* EX5200/EX7200 only
Computer/USB display/ RGB video/
USB
*