Epson EX30, User Manual

Page: 23 / 118

Setting Up the Projector
23
Projector Placement Options
When projecting from the front, you should place the projector
directly in front of the center of the screen, facing the screen squarely.
The center of the lens should be about level with the bottom of the
screen.
If you place the projector below screen level, you may need to tilt it up
by extending the front adjustable foot. Tilting the projector causes the
image to become “keystone” shaped, but you can correct the
distortion (see page 44).
You can also install the projector in three other viewing setups: ceiling
projection, rear projection onto a semi-transparent screen, or
rear/ceiling projection.
To project from overhead, you’ll need the optional ceiling mounting
hardware (see page 12). You’ll also need to select the appropriate
Projection
setting in the projector’s Extended menu to orient the
image correctly (see page 66).
note
After positioning the
projector, you may want to
connect a Kensington
MicroSaver
®
anti-theft
device to the lock port on the
projector. You can purchase
this from Epson; see
page 12
.
Front projection
Rear projection Ceiling projection Rear/ceiling projection