Epson EU-m30 Series Developer'S Manual Download Page 83 | Manualshive

Page: 83 / 85

background image

76

For details, see the "EPSON OPOS ADK for .NET MANUAL Application Development Guide Cash Drawer

(EPSON Standard)" and the "UnifiedPOS Specification". You can acquire documents regarding the UnifiedPOS

from the following link.
https://www.omg.org/retail/unified-pos.htm

S.2.5

Epson ePOS SDK for Android

The output command for the drawer kick pulse and the status transmission command are provided in each SDK

library. For details, see the user's manuals provided with each SDK.

S.3

Controlling the Optional External Buzzer (Model for specified customer only)

You can set the optional external buzzer to buzz when an error occurs and when an automatic cut off occurs. By

using the driver or the command, you can specify when to sound the buzzer.
In addition, the beep pattern and how many times to sound the buzzer can be changed.

S.3.1

ESC/POS Command

Use the buzzer control command or the output command for the specified pulse. For details, see the ESC/POS

Command Reference.

S.3.2

For Windows Printer Drivers (APD)

Use the DirectIO function or the API for opening the drawer. For details, see the manual for Status API of the

drivers.

S.3.3

OPOS (OCX Driver)

Register a POS printer using the SetupPOS Utility and control using the DirectIO function.
For details, see the "EPSON OPOS ADK MANUAL APPLICATION DEVELOPMENT GUIDE POSPrinter
(TM Series)".

S.3.4

OPOS for .NET

Register a POS printer using the SetupPOS Utility and control using the DirectIO function.
For details, see the "EPSON OPOS ADK for .NET MANUAL Application Development Guide POSPrinter".

S.3.5

Epson ePOS SDK for Android

The command for the buzzer function is provided in each SDK library. For details, see the user's manuals pro-

vided with each SDK.

«
...
81
82
83
84
85
»

Summary of Contents for EU-m30 Series






















































































Reviews:

No comments

Related manuals for EU-m30 Series

Brand: Octave Pages: 2

Brand: Magicard Pages: 6

Brand: Datamax Pages: 19

Brand: GE Pages: 16

Brand: Kodak Pages: 2

Brand: Oki Pages: 40

Brand: Aficio Pages: 156

Brand: Kyocera Pages: 708

Brand: Me3D Pages: 14

Brand: BIXOLON Pages: 20

Ecosys FS-1800+

Brand: Kyocera Mita Pages: 31

Brand: Oki Pages: 64

Brand: Radio Shack Pages: 42

Brand: Epson Pages: 24

Brand: Epson Pages: 2

Stylus CX3500 Series

Brand: Epson Pages: 4

STYLUS CX3700 SERIES

Brand: Epson Pages: 4

Brand: Epson Pages: 60

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands