Configuring Default Policy
To filter traffic, configure the default policy. The default policy applies to every user or group connecting to the
printer. For more fine-grained control over users and groups of users, configure group policies.
1.
Access Web Config and then select the
Network Security
tab >
IPsec/IP Filtering
>
Basic
.
2.
Enter a value for each item.
3.
Click
Next
.
A confirmation message is displayed.
4.
Click
OK
.
The printer is updated.
Related Information
&
“Application for Configuring Printer Operations (Web Config)” on page 301
Default Policy Setting Items
Default Policy
Items
Settings and Explanation
IPsec/IP Filtering
You can enable or disable an IPsec/IP Filtering feature.
❏
Access Control
Configure a control method for traffic of IP packets.
Items
Settings and Explanation
Permit Access
Select this to permit configured IP packets to pass through.
Refuse Access
Select this to refuse configured IP packets to pass through.
IPsec
Select this to permit configured IPsec packets to pass through.
>
>
Encrypted Communication Using IPsec/IP Filtering
435
Summary of Contents for ET-5800 Series
Page 17: ...Part Names and Functions Front 18 Inside 20 Rear 21 ...
Page 29: ...Loading Paper Paper Handling Precautions 30 Paper Size and Type Settings 30 Loading Paper 31 ...
Page 34: ...Placing Originals Placing Originals 35 Originals that are not Supported by the ADF 36 ...
Page 456: ...Where to Get Help Technical Support Web Site 457 Contacting Epson Support 457 ...