background image

When this error occurs, try the scanning operation with your

software over again. The scanner returns to normal when it

receives correct commands. Normally you do not need to reset

the scanner.

  Interface error

The interface setup is wrong, or the scanner is not properly

connected to the computer.

When this error occurs, check the interface connection. Push the

RESET 

button or turn the scanner off and then back on to reset it.

Fatal error

This indicates one of the following problems:

One or more fluorescent lamps needs to be replaced.

The transportation screw is not released.

The scanner is broken.

There is a problem, such as an open cover, with the optional

automatic document feeder.

Check that the transportation screw is released and check the

automatic document feeder; then push the 

RESET 

button. If the

scanner still does not operate properly, try turning the scanner

off and then back on. If the scanner still does not operate

properly, or if this error occurs repeatedly, consult your dealer.

Option error

This indicates a problem such as a paper jam with an installed

option unit.

Check the option unit and correct the cause of the trouble.

Troubleshooting and Maintenance 4-3

Summary of Contents for ES-800C


























































































Reviews: