Epson ES-600C Page 79 User Manual Download

Page: 79 / 90

This function processes the image data so that the data will be

most suited for the characteristics of the color output device

used. For example, CRT displays use the additive primary

colors-green, red and blue-to produce other colors. On the

other hand, printers use subtractive primary colors-magenta,

cyan and yellow (and often additional black to give more

definition), and colors can differ slightly depending on the

printing methods or the types of ink used.

CRT displays

This setting compensates colors for the characteristics of

color CRT displays.

Impact dot-matrix printers

This setting compensates colors for the characteristics of

impact dot-matrix color printers.

Thermal transfer printers

This setting compensates colors for the characteristics of

thermal transfer color printers.

Ink jet printers

This setting compensates colors for the characteristics of ink

jet color printers.

Appendix A-15

Summary of Contents for ES-600C



























































































Search results

Summary of Contents for ES-600C

Reviews:

Related manuals for ES-600C

Brands by name

Popular brands

Epson ES-600C, User Manual

Search results

Summary of Contents for ES-600C

Reviews:

Related manuals for ES-600C

Brands by name

Popular brands