Type of Original
Required Settings
Envelopes
Select
Off
in
Detect Double Feed
.
Plastic cards
Select
Plastic Card
on the
Document Size
list, or select
Off
in
Detect Double Feed
.
Carrier Sheet
❏
If you select
Auto Detect
from the
Document Size
list, paper skew in the original is
automatically corrected even if you select
Off
in
Correct Document Skew
.
❏
If you select a other size than
Auto Detect
from the
Document Size
list, you can only use
Contents Skew
when using
Correct Document Skew
.
Paper Skew
is not applied when this is selected. When you select
Paper and Contents Skew
,
only contents skew is corrected.
Large size originals
If the size of the original you want to scan is not on the
Document Size
list, select
Customize
to
open the
Document Size
window. Next, create the size manually on the window.
Long paper
If the size is not listed on the
Document Size
list, select
Auto Detect (Long Paper)
or select
Customize
to create a custom document size.
Laminated cards
To scan transparent areas around the edges, select
Settings
on the
Document Size
list to open the
Document Size Settings
window. Next, select
Scan laminated card
in the window.
Note:
The appropriate effect may not be achieved depending on the original. If transparent areas
around the edges are not scanned, select
Customize
from the
Document Size
list, and then
create the size manually.
Sending Invoice or Receipt Data to an Accounting
Service
You can send scanned invoices or receipts to the following accounting services:
❏
QuickBooks Online
Available accounting services are subject to change without notice.
This section explains the basic steps for scanning and sending invoices or receipts to an accounting service.
See the Epson ScanSmart help for details on how to use the application.
1.
Load the invoices or receipts in your scanner.
2.
Press the
button on the scanner.
The originals start scanning and Epson ScanSmart opens.
User's Guide
Basic Scanning
55
