Epson Equity IIe, User Manual

Page: 52 / 276

2. To change the current setting to
Enter.
3. Highlight
*****
*****and
press
Enter
to return to the main Setup menu.
If you later remove the math coprocessor, follow the same
procedure to change the setting again.
Setting the Real-time Clock
The real-time clock in your Equity IIe constantly tracks the
time and date-even when the computer is turned off. The first
time you run the Setup program, you
the
set the time and date for your computer.
You may need to use this option again later to adjust the time
for daylight savings time. The Equity IIe automatically changes
the date for leap years.
Note
Another way to change the real-time clock’s time and date is
with the MS-DOS TIME and DATE commands. See your
MS-DOS Reference Manual for instructions.
Follow these steps to set the real-time clock:
1. At the main Setup menu, highlight
If the time and date have been previously set, the current
settings appear:
If the time and date are correct, you can skip the rest of this
section.
2-16 Running the Setup Program