Epson Equity IIe, User Manual

Page: 212 / 276

When you run the test for 1.2MB, 720KB, or 1.44MB drive, you
see this prompt:
1.
Remove the diskette. The program displays the following
prompt:
Re-insert 1.
Reinsert the diskette. If no errors occur, the menu reappears.
An error occurs if you do not remove or replace the diskette in
time or if the drive is malfunctioning.
Run All Above Checks
To run all the tests on the menu in sequence, select 5. When
you choose this option, all checks for the diskette drive(s) and
controller are performed automatically in sequential order.
Although you do not start each test, you must still supply the
appropriate responses to progress from one test to the next.
Press
E
SC
to return to the menu.
Math Coprocessor Check
Use this option to check the operation of the 80287 math
coprocessor if you have one installed in your computer. To
check the math coprocessor, select option
7
from the Device
List.
Before running any tests, the computer checks the settings in
CMOS RAM to ensure that a coprocessor is installed. If the
coprocessor is missing, or if you have not changed the setting in
CMOS RAM with the Setup program, an error occurs and the
test ends.
Performing System Diagnostics
C-27