manualshive.com logo in svg

Epson Equity IIe, User Manual, Page: 187 / 276

Share
Download
Epson Equity IIe User Manual Download Page 187

Starting System Diagnostics

To run the System diagnostics program, you must turn on your
computer with the Reference diskette in drive A. If you start
this program in any other way, some tests may produce strange
results.

To start the System diagnostics program, follow these steps:

1. Insert the Reference diskette in drive A.

2. Turn on or reset the computer. The Operation Menu

appears.

3.

If 

the 

Num Lock 

indicator is illuminated, press 

Num Lock

to turn off the function.

4.

Press 3 or use

 

to select 

 

 

and

then press 

Enter.

When you start the System diagnostics program, the computer
checks any peripheral devices that are connected to the system.
Then you see a list of the devices available for testing. This list

includes only the devices that are part of your system, such as
the following, for example:

DEVICE LIST

1 - System board

2 - Memory

3 - Keyboard

5 - Color graphics adapter and CRT

6 - Diskette drives and controller

9 - Parallel port (printer interface)

11 - Serial port (RS-232C port)

14 - Dot-matrix printer

17 - Hard disk drives and controller

DEVICE LIST is correct ? (Y/N)

C-2

Performing 

System Diagnostics

Summary of Contents for Equity IIe





















































































































































































































































































Reviews:

No comments