Epson Equity IIe, User Manual

Page: 138 / 276

The following paragraphs describe the options in the table.
The d:path parameter specifies the pathname. You specify the
pathname if the file EEMM286.SYS is not in the root directory
of the hard disk or diskette from which you load MS-DOS. For
example, if EEMM286.SYS is in a directory called \DOS on
drive C, include the pathname, like this:
DEVICE=C:\DOS\EEMM286.SYS
The size parameter allows you to specify in pages the amount of --
extended memory to be used as expanded memory. (One page
equals 16KB.)
This example tells the computer to use 128 pages of extended
memory as expanded memory:
D E V I C E = E E M M 2 8 6 . S Y S 1 2 8
The /K switch specifies that the size parameter is expressed in
KB. This example tells the computer to use 256KB of extended
memory as expanded memory:
D E V I C E = E E M M 2 8 6 . S Y S 2 5 6 / K
4-48 Using MS-DOS with Your Equity IIe