Epson Equity IIe, User Manual

Page: 133 / 276

Creating an AUTOEXEC.BAT File
Here is an example of an AUTOEXEC.BAT file:
C:\;C:\DOS;C:\WP
$P$G
The first line tells MS-DOS to look for programs or batch files
in the root directory, the DOS directory, and your word
processing directory. This way you can run programs in those
directories without having to specify pathnames in the
commands. The second line changes the MS-DOS command
prompt so that it displays your current directory.
To create an AUTOEXEC.BAT file, you can use any command
or program that lets you create a text-only file. If you have a
word processing program that can save a file as a text-only file
(sometimes called an ASCII text file), you can use that program
to create your AUTOEXEC.BAT file. Name the file
AUTOEXEC.BAT and store it in the root directory of the hard
disk or diskette from which you load MS-DOS.
Using MS-DOS with Your Equity IIe
4-43