Epson Equity IIe, User Manual

Page: 109 / 276

The Current Directory
MS-DOS always recognizes one directory as the current (or
default) directory, just as it always recognizes one drive as the
current drive. The current directory is the directory you are
logged onto at the time and the one in which MS-DOS
performs your commands, unless you tell it to do otherwise. If
you installed MS-DOS according to the instructions in your
MS-DOS Installation Guide, the MS-DOS command prompt
displays the current directory.
If you want to run a program or access a data file that is not
stored in the current directory, you can either change
directories (making a different directory the current directory)
or include a pathname in your command.
Changing the Current Directory
To change from one directory to another, use the CHDIR
command, or its shorthand equivalent, CD. For example, to
change to the root directory of the current drive from anywhere
in the directory tree, type the following and press
Enter:
CHDIR
If you are in the WORDPROC directory and you want to
change to PERSONAL, a subdirectory of WORDPROC, type
the following and press
Enter:
To change from PERSONAL back to WORDPROC, you can
use the special symbol . . (two periods). The . . symbol always
designates the parent directory, which is the directory one level
above the current directory. You can type:
. .
Using MS-DOS with Your Equity IIe
4-19