Epson Equity 386SX PLUS, User Manual

Page: 144 / 284

Adding Memory Modules
The standard Equity 386SX system comes with 1MB of on-
board memory. You can add SIMMs (single inline memory
modules) to increase the amount of memory in the computer.
With added SIMMs, the total amount of memory in your
computer must be one of the following: 2MB, 4MB, 6MB, 8MB,
10MB, 12MB, or 14MB.
You install SIMMs on the SIMM card that comes with
your computer. Any SIMMs you install must have 70ns
(nanosecond) access speed or faster to operate in the
Equity 386SX. Check with your dealer to ensure that the
correct type of SIMMs are used.
There are 16 SIMM sockets on the SIMM card organized in two
banks containing eight sockets each. Each socket can contain
either one 256KB or one 1MB SIMM. The following table
shows the possible configurations for the Equity 386SX:
Possible Equity 386SX SIMM configurations
Left bank Right bank
Total
1A 2A 3A 4A 5A 6A 7A 8A 12A 13A 14A 15A 16A 17A 18A 19A
MB
1 M B
* * * *
2 M B
1 * * *
l
1 4 M B
*
l l
1 1 6 M B
l l
* 1 1 1 8 M B
1111 *
l
* * 1 1 1 1 1 O M B
' 1 1 1 1 1 1 2 M B
1 *
l
* 1 1 1 1 1 1 14MB
* = 256KB SlMMs
1 = 1MB SlMMs
5-2 Installing Options