Epson EpsonNet C82391, Administrator'S Manual

Page: 94 / 299

4-48
Settings for NetWare
When there is a primary server at the dial-up destination
For local networks with file servers:
❏
When the power is turned on
A dial-up is generated because access is made to a local file
server first and then to a primary server. There is no problem
since this dial-up only occurs at startup.
❏
When the interface card is not correctly set
A dial-up is generated because access is made to a local file
server first and then to a primary server. This dial-up is
repeated at intervals of approximately 5 minutes. Make the
interface card settings correctly to avoid this problem.
❏
During normal operation (standby)
An SPX Watchdog packet is sent according to the NetWare
protocol convention. Use a router with a vicarious response
function to avoid a dial-up.
❏
During normal operation (printing)
A dial-up is generated while the printing data is being
transferred. This is not a problem because it is a dial-up
specific to the dial-up network.
Local network
Printer
File
server
Dial-up
router
Dial-up
router
Primary file server
(primary print server)
Remote network