Epson EpsonNet C82391, Administrator'S Manual, Page: 25 / 299

1
Getting Started
1-3
You cannot print a status sheet if the printer has started printing,
if it is off-line, or if it is not ready to print.
Note:
If the printer does not print a status sheet, make sure that the printer is
on-line and no print jobs are being processed, then wait a minute. If it
still does not print a status sheet, turn the printer off, wait until the
status lights go out, and turn it on again.
c
Caution:
After turning off the printer, wait until the status lights go out
before turning it back on; otherwise the interface card may not
work correctly.
Network connectors
The interface card can detect which kind of cable is attached. You
do not need to make any hardware or software settings to specify
the cable type.
RJ-45 connector:
Connect a Category-5 shielded twisted pair cable to the RJ-45
connector on the interface card. You can use this cable for both
10Base-T and 100Base-TX.
c
Caution:
You must use a Category-5 shielded twisted-pair cable to connect
the interface card to prevent malfunctions.