Epson EpsonNet C82391, Administrator'S Manual, Page: 142 / 299

7-8
Settings for Macintosh
Entity type:
Displays the printer’s entity type. Do not change the entity
type unless "epson" is displayed. If "epson" is displayed, you
need to enter the entity type to match the driver for the printer.
To do this, click the
Entity configuration button and enter the
entity type.
Entity configuration button:
Click this button and enter the appropriate entity type (up to
32 characters).
Network number set:
Select either
Auto
or
Manual
.
Auto
is usually preferred.
Network number for manual mode:
Type a value between 0 and 65534 when Manual is selected
for the Network number setting.
5. After making the settings, click OK . The Password dialog box
appears.
6. Enter your password (up to 20 characters) and click OK to
save settings. If you are entering a password for the first time,
click
Change and set the password. For more information
about passwords, see “About passwords” on page 10-7.
Follow the on-screen instructions. After updating is complete,
refresh the configuration by selecting
Refresh from the View
menu.
c
Caution:
Since it takes 2 or 3 minutes to send new settings to the
interface card, you must wait until the on-screen message
appears before turning off your printer.