manualshive.com logo in svg

Epson EPL N2700, Reference Manual

Share
Download
Epson EPL N2700 Reference Manual Download Page 16

1-2      

Controlling the Printer

Egret

Ref. Guide

paper.bk

Rev. D

A5 size

CONTRL.FM

3/18/99

Pass 0

L

Proof Sign-off:
M.Hida

_______

K.Nishi

_______

K.Norum

_______

About Making Printer Settings

You can control the operation of your printer from your computer 
by using the printer driver software packaged with your printer, 
or from the printer’s control panel by using the OneTouch modes 
and SelecType menus. You should use your printer driver to 
make printer settings whenever you can, since settings made in 
the printer driver override similar settings you make from the 
control panel.

Printer driver

Use the printer driver to make every day printer settings easily 
and conveniently. You can access the printer driver through an 
application’s Print command, or from Windows by choosing the 
Printers folder or program group. Be aware that settings you 
make in your application software override printer driver 
settings. See the printer driver's online help for more information.

Install the printer software in your computer as instructed by your 
network administrator. An Administrator’s Guide is included in 
this printer package to guide your network administrator when 
setting up the printer for use on a network.

Control panel

Use the control panel’s OneTouch modes or SelecType menus to 
make printer settings when you cannot make a setting in your 
application software or printer driver.

The OneTouch modes are the easiest way to make several basic 
settings from the printer’s control panel. See Chapter 1, “Using 
the OneTouch Modes” for more information.

The SelecType menus have more detailed options than the 
OneTouch modes, but it may take a few extra steps to make those 
settings. See Chapter 5, “SelecType Settings” for more 
information. 

Summary of Contents for EPL N2700















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands