Epson EPL-N2550 User Manual Download Page 134

Page: 134 / 339

134

Using the PostScript Printer Driver

8. Click

Finish

9. Click

Have Disk

in the Add Printer Wizard and specify the

following path for the CD-ROM. If your CD-ROM drive is D:,
the path will be

D:\ADOBEPS\ENGLISH\WIN2K_XP\PS_SETUP

. Then click

Note:

Change the drive letter as needed for your system.

10. Select the printer and click

11. Follow the on-screen instructions for the rest of the

installation.

12. When installation is done, click

Finish

For Windows Me or 98 users

1. Install the EpsonNet Print. Refer to “Installing EpsonNet

Print” in the

Network Guide

to find the instructions.

2. Install the printer driver. See "Installing the PostScript printer

driver for the parallel interface" on page 129 for details.

3. Set the printer port to

EpsonNet Print Port

. Refer to

“Configuring the Printer Port” in the

Network Guide

to find

the instructions.

Note:

High-speed Printing (RAW) is not supported.

Accessing the PostScript printer driver

You can access the PostScript printer driver directly from any
application programs, from your Windows operating system.

Summary of Contents for EPL-N2550




















































































































































































































































































































































Search results

Summary of Contents for EPL-N2550

Reviews:

Related manuals for EPL-N2550

Brands by name

Popular brands

Epson EPL-N2550, User Manual

Search results

Summary of Contents for EPL-N2550

Reviews:

Related manuals for EPL-N2550

Brands by name

Popular brands