Epson EPL-7000, User Manual

Page: 94 / 330

SelecType Options
ON
OFF
When DSR (Data Set Ready) is off, the signal level is permanently
set HIGH, allowing the printer to send data to the computer. For
most communications purposes, this option should be set to OFF
(signal level HIGH). When DSR is on, data is sent to the computer
only when DSR is HIGH.
ON
OFF
When CTS (Clear To Send) is off, the signal level is permanently
set HIGH. The factory setting is OFF (signal level is HIGH). This
setting should be set to OFF for most communications purposes.
When CTS is on, data is sent to the computer only when CTS is
HIGH.
1
to
99
(Kbytes)
The receive buffer option allows you to change the size of the
printer’s input buffer. By choosing an appropriate buffer size, you
can quickly transfer the contents of a file from the computer’s
memory to the printer’s memory. The printer then prints the
information from its own memory and frees up the computer for
other tasks. The factory setting is 1K.
SelecType 3-31