How To
45
Network Guide
Selecting the port
1. Click
Start
, click
Control Panel
, click
Printers and Other Hardware
, and then click
Printers and Faxes
.
2. Right-click the printer icon and then select
Properties
.
3. Click the
Ports
tab and then select the port you have set with the NET USE command.
Windows Me/98
For Windows Me/98, the printer driver installation procedure differs depending on the
printing method you prefer. Epson recommends printing with EpsonNet Print. See “For
Windows Me/98/95 Users” on page 137.
LPR printing
Since Windows Me/98 does not support LPR, standard TCP/IP printing cannot be used.
However, you can print via TCP/IP using the EpsonNet Print utility included on the
Software CD-ROM. First, install EpsonNet Print. Then, install the printer driver. See “About
EpsonNet Print” on page 130 for more details.
Internet printing (Windows 98)
Internet printing is possible by using the EpsonNet Internet Print utility included on the
Software CD-ROM. First, install EpsonNet Internet Print. Then, install the printer driver and
set the printer port. See “About EpsonNet Internet Print” on page 144 for more details.
Internet printing (Windows Me)
Installing the IPP client
The IPP client must be installed on your computer. Follow the steps below to install it.
1. Insert the Windows Me CD-ROM.
2. Select the
add-ons
folder, and then select the
IPP
folder.
3. Double-click
wpnpins.exe
. Then follow the on-screen instructions.
4. Click
OK
to restart your computer.
