Chapter 5 Installing and Removing Options
106
Memory Module
Your printer is provided with 2 MB of standard memory. You can
increase printer memory up to 13 MB by installing an optional
SIMM (Single In-line Memory Module). Increasing the printer
memory allows you to print complex or graphics-intensive
documents.
You can purchase SIMMs from various vendors. Make sure that
the SIMM you purchase meets the following requirements:
Note:
When you install a 4 MB or 8 MB SIMM, the total printer memory is
the standard 2 MB plus the optional SIMM. However, even if you install
an optional 16 MB or 32 MB SIMM, the total printer memory is
increased to its maximum of 13 MB only.
Installing
Follow these steps to install an optional memory module:
c
Caution:
Before you install a memory module, be sure to discharge any
static electricity by touching a grounded piece of metal.
Otherwise, you may damage static-sensitive components.
w
Warning:
Be careful when working inside the printer as some components
are sharp and may cause injury.
Memory size
4 MB, 8 MB, 16 MB, or 32 MB
Type
72-pin, EDO mode type
Access speed
60 ns or less
Measurements
Dimensions within 108 mm (4.25 in.)
×
26 mm
(1.02 in.), with a thickness of 10 mm (0.4 in.)
Summary of Contents for EPL-1220
Page 1: ......
Page 61: ...Chapter 3 Using the Printer Driver 61 4 Select the Enable EPSON Printer port check box ...
Page 189: ......
