Epson EPI-4000, User Manual

Page: 270 / 292

Command Summa y
for
LQ/FX Emulation
User-defined Characters
ASCII Dec. Hex. Description
ESC &
3 8
26 Define User-defined Characters
ESC:000 58 3A
Copy ROM to RAM
ESC % n 37
25
Select User-defined Set
0: Normal set
1: User-defined set
ESC 6 54 36 Enable Printable Characters
With Extended Graphics enables the
printing of codes 128-159 as characters
ESC 7 55 37 Enable Upper Control Codes
Cancels ESC 6
Graphics
ASCII Dec.
Hex.
ESC K n1 n2 75 4 B
ESC L n1 n2 76 4C
ESC Y n1 n2 89 59
ESC Z n1 n2 90 5A
ESC ? s m 63 3F
ESC ^ m n1 n2 94 5 E
*Note:
ESC K, L, Y, and Z each select an 8-pin mode. Total columns =
n1 + (n2 x 256)
Description
Select Single-density Graphics Mode’
Select Double-density Graphics Mode*
Select High-speed Double-density’
Select Quadruple-density Graphics’
Reassign Graphics Mode
Reassigns command s to mode
m
s = K, L, Y, or Z
m = mode (O-6)
Select 9-pin Graphics Mode
m = print density
0: single
1: double
Total columns = n I + (n2 x 256)
B-30 Modes and Commands