Epson EPI-4000, User Manual

Page: 236 / 292

LQ and FX Emulation Mode
Note: The font samples in the table show only portrait orientation
since the character itself is the same in portrait or landscape
orientation.
To select a resident font, you can use your application program, the
SelecType typeface menu described in Chapter 2, or printer
commands.
Character Sets
This section provides character tables for the character sets available
in LQ and FX emulation mode. The tables show both the characters
and their hexadecimal values.
To select a character set, you can use the SelecType extended
graphics menu as described in Chapter 2.
To find the hexadecimal value for a character, find the character on
the table. Move to the top of the column for the first digit of the
hexadecimal character. Then move to the far left of the row for the
second digit. For example, the character “Z” has a hexadecimal
value of 5A.
To find the decimal value for a character, determine the
hexadecimal value for the character. Then use the table at the end of
this appendix to convert the hexadecimal value to a decimal value.
A-13