58
Adjusting the Sound
Follow the steps in this section to optimize sound for your home theater.
Set the Boundary Control Switch
Set the
BOUNDARY CONTROL
switch on the back of the subwoofer to the setting that
most closely matches the screen’s location on the wall or ceiling. This setting optimizes the
bass sound for your installation. Refer to the chart below, which shows the correct setting
(
A
,
B
,
C
,
D
, or
E
) for various mounting locations.
Example: The screen is mounted on the wall approximately 6 inches from the ceiling.
Therefore, you would select setting
C
.
Note
If you have a drop ceiling made of porous tiles, select setting
D
, no matter where the screen is located.
12”(A)
6”(E)
6”
24”
(B)
Distance from wall
Dist
a
n
ce fro
m
ce
iling
Screen (viewed from side)
Select the setting that most closely
matches the location of the screen
on the wall or ceiling.
(C)
(D)
Summary of Contents for Ensemble HD
Page 1: ...Installation Guide ...
