Making Basic Adjustments
31
2. Do one of the following:
■
Select one of the numeric correction values using the
u
or
d
button on the remote
control and press the
Enter
button
.
You see the setting reflected in the graph on the
right. The horizontal axis represents the input signal level, and the vertical axis
represents the output signal level. Press the
Gamma
button to exit.
■
Select
Customized
. Then continue with the next step.
3. Do one of the following:
■
Select
Adjust it from the image
. You see a gamma icon on the projected image. Use
the arrow buttons to move the icon to the area of brightness you want to adjust, then
press
Enter.
The custom gamma graph appears with the channel selected for
adjustment. Press the
u
or
d
button to adjust and then press
Enter.
■
Select
Adjust it from the graph
. When the gamma graph appears, use the
l
or
r
button to select the point on the graph that you want to adjust, and then use the
u
or
d
button to adjust the settings. Press
Enter
to save your setting and exit.
Adjusting RGBCMY
Use this feature to adjust the hue, saturation, and brightness for each of the red (R),
green (G), blue (B), cyan (C), magenta (M), and yellow (Y) color components.
1. Press the
RBGCMY
button. You see the following displayed on the screen:
2. Use the
u
or
d
button on the remote control to select the color you want to adjust, and
press the
Enter
button.
3. Select the
Hue
,
Saturation
, or
Brightness
for that color, and use the
l
or
r
button to
make the adjustment.
4. Press
Esc
to adjust another color, or press
RGBCMY
to exit.
Note:
You can also adjust the offset and gain using the RGB setting in the projector’s menu
system (see page 40).
