Epson Endeavor Pro, User Manual

Page: 51 / 187

Running the lnstallation Program
Follow these steps to install the PC1 IDE drivers:
1. Insert the PC1 IDE Drivers diskette in drive A.
2. Access the DOS prompt, if you are not there already
3 . T y p e
A :
and press
Enter
to log onto drive A.
4. Type
I N S T A L L
and press
Enter.
5. Follow the instructions on the screen to install the PC1 IDE
drivers on your hard disk.
N o t e
Not all hard disk drives can take full advantage of the IDE
interface; your hard disk drive must be compatible with
ATA-2 specifications. To find out whether your drive
supports ATA-2, see the drive documentation or contact the
drive manufacturer to request a product specification.
Installing Video Drivers
Your system already includes Windows video drivers that let
you get the best performance from your computer’s built-in
SVGA controller.
If you are using Windows 3.1, you also have the Galileo and
S3REFRSH utility programs, which let you control the
resolutions, colors, and refresh rates your Windows driver
uses.
2-22 Running SETUP and Installing Drivers