manualshive.com logo in svg

Epson EMP-S4, User Manual, Page: 22 / 77

Share
Download
Epson EMP-S4 User Manual Download Page 22

21

Functions for Enhancing Projection

Freezing the Image (Freeze)

The source image continues to project even when the screen is frozen. You 
can still perform operations such as changing files, without projecting any 
images.

PROCEDURE

You can turn this function on or off by pressing the [Freeze] button.

Changing the Aspect Ratio (Resizing)

This function changes the 

aspect ratio

g

 of images from 4:3 to 16:9 when 

component video

g

, 

S-Video

g

, or 

composite video

g

 images are being 

projected. 
Images which have been recorded in digital video or onto DVDs can be 
viewed in 16:9 wide-screen format. 

PROCEDURE

The display is changed whenever you press the button.

• Sound does not stop.
• Even though the image on the screen is frozen, the 

image source continues to project, and so it is not 
possible to resume projection from the point where it 
was paused.

• Pressing the [Freeze] button also clears configuration 

menu displays and help messages.

• The freeze function still works while the E-Zoom 

function is being used. 

Remote control

You can also make this setting using the "Resize" 
command in the "Signal" menu.

When images in squeeze 

mode are projected at 16:9

When images in Squeeze 

mode

g

 are projected at 4:3

Remote control

Summary of Contents for EMP-S4














































































Reviews:

No comments