manualshive.com logo in svg

Epson EMP-830, User Manual

Share
Download
Epson EMP-830 User Manual Download Page 84

83

List of Configuration Menu Commands

User’s Guide

Lets you select the brightness of the lamp from one of two settings.
If projecting images in a dark room or onto a small screen and the images are too bright, change the 
setting to "Low".
Compared with the "High" setting, the "Low" setting reduces power consumption and extends 
operating life of the lamp. (Power consumption: reduced by approximately 60W, Lamp operating life: 
increased by approximately 1.5 times)

Lets you set the shape and movement speed for the pointer. 

s

p.58

The shape of the pointer can be selected.

Pointer

Pointer Shape

Pointer Zoom

Selects the display size for the pointer.

Selects the movement speed for the pointer when the [

] button on the remote control is 

tilted.

Brightness Control

, 200%

100%

, Pointer2, Pointer3

Pointer1

, Low

High

Medium Speed

Pointer Speed

High Speed,

, Low Speed

Default setting values

Sets the properties to be applied when using the PinP function. 

s

p.57

Selects whether sound is to be output for the main screen or for the sub-screen.

Audio

Selects the image signal to be projected in the sub-screen from either composite video or 

S-Video

g

.

Reset

Returns all adjustment values in the "Setting" menu to their default values. 
If you would like to return all menu items to their default, 

s

"All Reset" 

p.86

Adjusts the sound volume for the input source being projected.

Volume

Tone

Adjusts the tone for the input source being projected.

Subscreen Image

, S-Video

Video

Audio Output

, Subscreen

Main Screen

PinP Options

Median value (0)

Median value (15)

Pointer Shape

, Pointer2

, Pointer3

Pointer1

Summary of Contents for EMP-830














































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands