Epson EMP 720, User Manual

Page: 27 / 106

Using the Projector
21
4. Press the red
Power
button on top of the projector or on the
remote control.
The power light flashes green as the projector warms up, and the
projection lamp comes on in about 30 seconds. The power light
stays green.
5. Do one of the following:
■
If you’re using a computer, turn it on or restart it. In a few
moments, you should see your computer display projected.
(Windows
®
only: If you see a message saying that it has found
a plug-and-play monitor, click
Cancel
.)
■
If you’re projecting a video, press the
Source
button on top
of the projector to switch to your video source, and press the
Play
button on your DVD player or other device.
If a projected image fails to appear, see the next section for help.
Once you see your image, turn to page 25 for instructions on focusing
and making other image adjustments.
When you’re done with your presentation, shut down the projector as
described on page 28. Shutting down the projector correctly prevents
premature lamp failure and possible damage from overheating.
Menu
A/V Mute
E-Zoom
Freeze
Color Mode S-Video/Video Computer
Page up Page down
Power
power light
remote control projector
warning
Never look into the lens when
the lamp is on. This can
damage your eyes, and is
especially dangerous for
children.
720-730.book Page 21 Thursday, October 30, 2003 11:32 AM