Epson EMP 6110, User Manual

Page: 33 / 84

List of Functions
33
Settings Menu
Sub Menu Function
Keystone You can correct vertical keystone distortion in images.
s
Quick Start Guide
Operation Lock You can use this to restrict operation of the projector's control panel.
s
p.27
Pointer Shape You can select the shape of the pointer.
s
p.18
Pointer 1: Pointer 2: Pointer 3:
Brightness Control You can set the lamp brightness to one of two settings.
Select "Low" if the images being projected are too bright such as when projecting images in a dark room or onto a small screen. When "Low" is
selected, the amount of electricity consumed is changed as follows, and fan rotation noise during projection is reduced.
Electrical consumption: about a 18% decrease
Volume You can adjust the volume.
RCA Audio Input
(EMP-6110 only) You can select whether to use the RCA audio port (L-Audio-R) as audio input for either the
equipment connected to the Video port or the equipment connected to the S-Video port.
For example, the illustration on the right shows how the image port and the audio port are
combined when "S-Video" is selected.
Remote Receiver You can limit the reception of the operation signal from the remote control.
When you want to prohibit operation by remote control, or if the remote receiver has a fluorescent light too close to it , you can make settings to
deactivate the remote receiver you do not want used or that is experiencing interference.
When you select "S-Video"