93
Optional Accessories
The following optional accessories are available for purchase if required. This list of optional accessories is current as of June 2004. Details of accessories are
subject to change without notice.
* A special method of installation is required in order to suspend the projector from the ceiling. Please contact the place of purchase if you would like to use
this installation method.
Soft carry case ELPKS16
Use this case if you need to carry the projector by hand.
Spare lamp ELPLP27
Use as a replacement for spent lamps.
Filter kit ELPAF05
(5 air filters)
Use as a replacement for spent air filters.
60" screen ELPSC07
80" screen ELPSC08
100" screen ELPSC10
A portable roll-type screen. (
4:3)
50" portable screen ELPSC06
A compact screen which can be carried easily. (Aspect ratio 4:3)
VGA-HD15 PC cable ELPKC02
(1.8 m (6 ft.) - for mini D-Sub 15-pin/mini D-Sub 15-pin)
This is the same computer cable as the projector's accessory computer
cable.
VGA-HD15 PC cable ELPKC09
(3 m (9.8 ft.) - for mini D-Sub 15-pin/mini D-Sub 15-pin)
VGA-HD15 PC cable ELPKC10
(20 m (65.6 ft.) - for mini D-Sub 15-pin/mini D-Sub 15-pin)
Use this extension cable if the accessory computer cable is too short.
Remote control unit ELPST13
This is the same remote control as the projector's accessory remote
control.
Component video cable ELPKC19
(3 m (9.8 ft.) - for mini D-Sub 15-pin/RCA male
×
3)
source.
Ceiling mount
*
ELPMB12
Use when installing the projector to a ceiling.
Ceiling plate
*
ELPFC03
Pipe 370 (370 mm (14.57 in.)/silver)
*
ELPFP04
Pipe 570 (570 mm (22.44 in.)/silver)
*
ELPFP05
Pipe 770 (770 mm (30.31 in.)/silver)
*
ELPFP06
Use when installing the projector to a high ceiling or a ceiling with
veneer panels.
Image presentation camera ELPDC04
Use when projecting books, OHP films and slides.
Summary of Contents for EMP-54
Page 1: ...User s Guide ...
