61
Using the Configuration Menu Functions
Using the Configuration Menu Functions
*Contents of the menu screen of EMP-74L differs slightly.
"Advanced" Menu
Sub-menu
Function
Default
Brightness
Control
(EMP-74/
54 only)
This lets you set the lamp brightness to one of two settings.
Select "Low" if the images being projected are too bright
such as when projecting images in a dark room or onto a
small screen.
When "Low" is selected, the brightness of the images is
reduced, the amount of electricity consumed and noise
produced during projection are reduced and the lamp's
operating life is extended.
High
Startup
Screen
Sets whether the startup screen is displayed or not.
To change the user's logo, you need to record your own user's
logo.
This cannot be changed from enabled ("ON") to disabled
("OFF") if the "User’s Logo Protect" function of Password
Protect has been set to "ON". Cancel the Password Protect
function before changing the setting.
ON
Summary of Contents for EMP-54
Page 1: ...User s Guide ...
