58
Using the Configuration Menu Functions
Using the Configuration Menu Functions
"Setting" Menu
Sub-menu
Function
Default
Keystone
Corrects vertical keystone distortion in images.
•When keystone correction is carried out, the projected
image will become smaller.
•If the images become uneven in appearance after keystone
correction is carried out, decrease the sharpness setting.
Median value
(0)
Auto
Keystone
Sets the function for automatically detecting the projector
angle and correcting keystone "ON" or "OFF" when the
projector is tilted vertically.
This function is only enabled when the "Projection"
command in the "Advanced" menu is set to "Front". If it is
set to something other than "Front", this menu cannot be
selected.
ON
Message
Sets whether display of the following messages is turned
"ON" or "OFF".
•Signal name when the video signal is switched
•Colour mode name when the colour mode is switched
•When no image signals are being input
•When an incompatible signal is input
•When the air filter needs replacing
ON
Back-
ground
Color
Sets the screen status when the [A/V Mute] button on the
remote control is being pressed or when no image signals are
being input to "Black", "Blue" or "Logo".
•To change the user's logo, you need to record your own
•If the "User's Logo Protect" function of Password Protect
has been set to "ON", the "Logo" setting cannot be changed
from "Logo" to "Black" or "Blue", or from "Black" or
"Blue" to "Logo". Cancel the Password Protect function
before changing these settings.
Blue
Sleep
Mode
Sets the energy saving operation when no signal is being
input.
•When set to "ON", projection stops automatically and then
after the
period is finished, the projector
changes to sleep mode if no operations are carried out for
30 minutes while the "No Signal." message is being
displayed. (The Power indicator lights orange.)
•Projection starts again when the [Power] button is pressed.
OFF
Summary of Contents for EMP-54
Page 1: ...User s Guide ...
