Epson EMP 51 - SVGA LCD Projector, Instruction Manual

Page: 40 / 82

38
Adding Image Effects
Using the Effect1 and Effect2 buttons, you can add effects to images during
presentation (to cancel this function, press the Esc button).
For effects settings, see "Effect Menu" (page 46).
Cursor/Stamp
This effect displays a cursor on the screen and freezes it at a desired location.
1.
Press the Effect1 button to display a cursor.
2.
Tilt the Enter button to move the cursor to a
desired position.
3.
Press the Enter button, and the cursor
position is displayed as a stamp.
Tip:
• Activate the horizontal bar to remove the
cursor/stamp display.
• To remove the stamp, press the Effect3 button.
Horizontal Bar
This effect displays a horizontal line on the screen and allows you to move it up
or down by remote control.
1.
Press the Effect2 button to display a
horizontal bar.
2.
Tilt the Enter button up or down to move the
horizontal bar up or down.
Tip:
• To remove the horizontal bar, activate the
cursor/stamp.