Epson EMP 400W, User Manual

Page: 6 / 75

Part Names and Functions
6
Rear
Name Function
A
Remote receiver Receives signals from the remote control.
s
Quick Start Guide
B
Speaker
C
Monitor Out port Outputs the image signal from the computer
connected to the Computer1 input port to an
external monitor. This is not available for
component video
g signals or other signals
being input to any port other than the
Computer1 input port.
s
p.61
Audio Out port Outputs the sound of the image currently being
projected to external speakers.
s
p.61
E D
F H G A
B C
D
Power inlet Connects to the power cable.
s
Quick Start Guide
E
RS-232C port When controlling the projector from a
computer, connect it to the computer with an
RS-232C cable. This port is for control use and
should not normally be used.
s
p.67
F
Computer1 input
port For video signals from a computer and
component video
g signals from other video
sources.
Audio1 input port Connect to the audio out port of the computer
connected to the Computer1 input port.
Computer2 input
port For video signals from a computer and
component video
g signals from other video
sources.
Audio2 input port Connect to the audio out port of the computer
connected to the Computer2 input port.
s
Quick Start Guide
G
S-Video input
port
For S-video g signals from video sources.
Video input port
For composite video g signals from video
sources.
Audio-L/R input
port Connects to the audio out port of the
equipment connected to the S-Video port or
Video input port.
s
Quick Start Guide
H
LAN port When a LAN cable is connected, you can
monitor and control the projector over a LAN.
s
p.62
Name Function