Problem Solving
40
f
i
o
Indicator is lit or flashing orange
: Lit
: Flashing
: Off
: Varies according to the projector status
Status
Cause
Remedy or Status
High Temp Warning
(This is not a problem. However, if the temperature rises too high again, projection stops automatically.)
• Check that the air filter and air exhaust vent are clear, and that the projector is not positioned against a wall.
• If the air filter is clogged, clean or replace it.
Replace Lamp
Replace it with a new lamp.
If you continue to use the lamp after the replacement period has passed, the possibility that the lamp may explode
increases. Replace it with a new lamp as soon as possible.
q
• If the projector is not operating properly, even though the indicators are all showing normal, refer to "When the Indicators Provide No
).
• If an indicator is displaying a status not described in the tables, contact your local dealer or the nearest address provided in the Support and
Service Guide.
s
Warning
Red
Orange
Orange
Summary of Contents for EMP 400W
Page 1: ...1 User s Guide ...
