List of Functions
28
Extended Menu
Sub Menu
Function
Display
You can make settings related to the projector's display.
Messages
: You can set whether to display (On) or not display (Off) the source name when you change the input source, the color mode name
when you change the Color Mode, a message when no image signal is input, and so on.
Display Background
*1
: You can set the screen status for when no image signal is available to "Black", "Blue", or "Logo".
Startup Screen
*1
: You can set whether the startup screen (the image projected when starting the projector) is displayed (On) or not (Off).
A/V Mute
*1
: You can set the screen displayed during A/V Mute as "Black", "Blue", or "Logo".
User's Logo
You can change the user's logo that is displayed as a background and displayed during A/V Mute.
Projection
You can choose one of the following settings according to the way the projector is setup.
Front" "Front/Ceiling" "Rear" "Rear/Ceiling"
You can change the setting as follows by pressing down the [A/V Mute] button on the remote control for about five seconds.
Front"
W
"Front/Ceiling"
Rear"
W
"Rear/Ceiling"
*1 When "User's Logo Protect" is set to "On" in "Password Protect", settings concerning user's logo cannot be changed. You can make changes after setting "User's
For EMP-280
For EMP-260
Summary of Contents for EMP-260
Page 1: ...1 User s Guide ...
