manualshive.com logo in svg

Epson ELPMB62, Installation Manual, Page: 85 / 92

Share
Download
Epson ELPMB62 Installation Manual Download Page 85

85

English

10 Appendix

Using the Easy Interactive Function

After you install your BrightLink projector (and the Touch Unit, if applicable), you need to perform calibration 
to align the positions of the cursor and your interactive pen(s) (and finger, if the Touch Unit is installed). See 
the projector’s online 

User’s Guide

 or 

Start Here

 folder for detailed instructions.

In order to use the Easy Interactive Tools software, you must first install the software on your computer. OS X 
users also need to install a driver that enables pen or finger touch interactivity to work. Both software 
programs are available for download.

For details, see the online 

User's Guide

 or visit:

U.S.:

 www.epson.com/support/brightlinkdownloads

Canada: 

www.epson.ca/support/brightlinkdownloads

Latin America: 

www.epson.com.jm/support

Using Auto Screen Adjustment

The Auto Screen Adjustment feature automatically corrects the position and shape of any image that is 110 
inches or smaller diagonally.

1. Place one corner marker in each corner of the intended image location.

If possible, avoid adjustments with the Auto Screen Adjustment, Quick Corner, or 
Keystone functions of the projector. Doing so may result in a reduction in image 
quality and pen or finger touch calibration.

Make sure you select the correct Screen Type setting before performing the Auto 
Screen Adjustment. Changing the Screen Type will reset any screen adjustments. See 
page 45 for more information.

The Auto Screen Adjustment may not work properly if:

❏

The projection surface is not flat.

❏

There are patterns, obstructions, or dirt/debris on the projection surface.

The corner marker stickers can only be placed once. If you want to re-use the markers, 
attach them to the included magnets.

Summary of Contents for ELPMB62





























































































Reviews:

No comments