Epson ELPHC100, User Manual

Page: 79 / 132

79
The top of the screen changes to EDIT:
3
Select the
PAGE
option.
Note
The TEXT option is for editing device names and commands. See “Editing Device Names and Commands” on
page 75.
The top of screen displays PAGE, as shown at right, and you see a list of
devices (DVD, CABLE, SAT, etc.).
4 Navigate to the page you want to add or hide.
If a page is already visible, it says
HIDE?
at the top of the screen. If a page is
currently hidden, it says
ADD?
.
5
Press the
LIGHT
button on the side of the remote control to add or hide the page.
Repeat steps 4 and 5 to add or hide additional pages.
6
When you’ve finished, press the
MAIN
button several times to return to normal operation.
Erasing Learned Buttons and Macros
You can erase any commands that were learned from another remote control or any macros you created.
Note
This operation does not erase the text used for commands or macros, just the functions that they perform. If you want to
delete the text itself, see “Editing Device Names and Commands” on page 75.
1
Press and hold both the
MAIN
and
ENT
buttons for approximately three seconds. The top of the screen
displays SETUP.
Note
You have 30 seconds to complete each step. After that, the remote control returns to normal operation.
2
Select the
ERASE
option.
You see this screen:
EDIT
TEXT
PAGE
EXIT
Select PAGE
PAGE
DVD
CABLE
SAT
HD
RADIO
1 OF 2
ERASE
LEARN
MACRO
EXIT