Epson ELPHC100, User Manual

Page: 45 / 132

45
Adjusting the Picture Quality
The settings described below control how the image is processed by the Ensemble HD system’s AV controller.
Before changing any of these settings, first be sure to select the best Color Mode as described on page 42.
Note
These settings adjust the picture quality for all sources, not for each source independently.
To access the Video menu, make sure the MAIN menu is displayed on the remote
control, press the
MENU
button, then select
Video
. You see this screen:
You can adjust the following settings:
•
Brightness
Adjusts the brightness so it’s suitable for your viewing conditions.
•
Contrast
Adjusts the contrast between the light and dark parts of the image.
•
Color
Adjusts the color intensity of the image.
•
Tint
Shifts the color balance between magenta and green.
•
Sharpness
Use this function to make lines and edges appear more distinct.
•
Noise Reduction
This function softens the image and reduces noise. Use only if you are receiving a weak signal.
•
HDMI Output
Sets the output signal to either 720P (for the PowerLite Home Cinema 720) or 1080P (for the PowerLite
Home Cinema 1080). Automatically defaults to the projector’s resolution.
•
Source Assign
Lets you combine audio and video sources connected to the AV controller through different ports. See
“Linking Audio and Video Sources” on page 34 for details.
Video
Language
Preference
Audio
Reset
Video
Brightness
Contrast
Color
Tint
Sharpness
Noise Reduction
HDMI Output
Source Assign
0
0
0
0
0
Medium
1080P
Move Enter Exit
Menu Sel