Epson ELPAP07 User Manual Download Page 179 | Manualshive

Page: 179 / 231

background image

FCC Compliance Statement for Wireless LAN 802.11b/g/n Adapter

Model: WN7512BEP (ELPAP07)

FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired operation of
this device.

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102
of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping
the radiator at least 7.9 inches (20 cm) or more away from person's body (excluding extremities: hands,
wrists, feet and ankles).

Epson America, Inc.

MS: 3-13

3840 Kilroy Airport Way Long Beach, CA 90806

Tel: 562-981-3840

179

«
...
177
178
179
180
181
...
»

Summary of Contents for ELPAP07








































































































































































































































Reviews:

No comments

Related manuals for ELPAP07

Brand: Qlogic Pages: 2

SANblade 2300 Series

Brand: Qlogic Pages: 108

Brand: Qlogic Pages: 2

Brand: Qlogic Pages: 2

SANblade QLA2342

Brand: Qlogic Pages: 16

SANblade QLA4050

Brand: Qlogic Pages: 4

Brand: Conrad Pages: 4

Brand: Weego Pages: 6

Brand: NetComm Pages: 6

Brand: StarTech.com Pages: 13

Brand: Emulex Pages: 2

Brand: Sabrent Pages: 4

Brand: Sena Pages: 67

Brand: Devolo Pages: 2

Brand: HQ Pages: 30

Brand: TP-Link Pages: 32

Brand: Allen-Bradley Pages: 96

Brand: D-Link Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands